| || |
Trans-Cal SSD-120 Blind Encoder
|Model||Trans-Cal SSD-120 Blind Encoder|
|Part Number||P/N: SSD120-30N|
|Voltage||14 or 28 volts|
|Included||Rack, Connector, Static Tubing, 18 Month Factory Warranty|
|Comments||Maximum Altitude: 30,000 feet (Higher altitude versions available, if needed for your aircraft)
Please note that Narco AT-50 and AT-50A transponders require an SSD-120 with Mod 1 (at extra-cost). The factory has recently changed their ordering requirements for these Encoders. If you need an SSD-120 with Mod 1, we recommend that you contact us for the latest price and lead time.
Make certain ATC knows your location! A transponder will transmit your position, but adding an encoder will also tell ATC your altitude. In addition to a transponder, you need either an encoding altimeter or a blind encoder to operate in Mode "C". If you don't already have an encoding altimeter, adding a blind encoder is definitely the easier and less expensive way to add Mode C capability.
(If you also need a transponder, please click the Transponder link to the left.)
This Trans-Cal SSD-120 is a dependable, solid-state blind encoder. It is compatible with most transponders, and may be mounted in any attitude. The most common location is behind your instrument panel. Installation involves connecting the SSD-120 to your static system, and wiring the encoder to your transponder.
If you wish, we can build a custom harness between the encoder and transponder, greatly simplifying the job. (Ask us for a quote!)
Trans-Cal's SSD-120 features include:
This item includes an 18 month factory warranty.
- Accurate to +/- 50 feet from -1,000 feet to 30,000 feet
- Rapid warm-up time
You may also be interested in a Transponder to use with this SSD-120. Both components are needed for Mode C or Mode S operation.
If you have any questions about this item, please click to send us an email.
Bennett Avionics: Quality Used Avionics, Professional Service