Categories
Categories
Brands
Brands
COM-810+R COMM Transceiver
Part Number: | P/N: 03114-0313 |
Condition: | Serviceable (Certified Used) |
Certification: | 8130-3 |
Voltage: | 14 V |
Included: | 90 Day Warranty |
Comments: | We are running critically low on displays for this radio. If we do not have one certified, it will take more time to get one ready. The scarcity of displays will also make it more difficult and expensive to support this radio in the future. |
Comments: | Due to display scarcity, we strongly recommend the TKM MX-11 instead. |
Comments: | There is no Rack and Connector included with this radio, as it is designed to use your existing Narco COM-11 / COM-111 / COM-120 hardware. |
Comments: | The COM-810+R is a good radio, but it was produced in limited numbers. If you need a compatible replacement before we locate the next COM-810+R, we recommend the TKM MX-11. |
Plug-in replacement: | TKM MX-11 |
Plug-in replacement: | Narco COM-120 |
Product Description
This is the hard-to-find Narco COM-810+R, which is a special version of the COM-810. Unlike the "regular" COM-810, the COM-810+R is designed as a slide-in replacement for the following radios:
- Narco COM-11
- Narco COM-11A
- Narco COM-11B
- Narco COM-111
- Narco COM-111B
- Narco COM-120
The "+" in the name means that this radio also offers the following upgrades:
- 760 COMM channel capability
- Active and standby frequencies are remembered when the radio is turned off
- 10 frequency memory
The COM-810+R also has the following features from the "regular" COM-810:
- Simultaneous digital display of both active and standby frequencies
- Push button frequency flip-flop
- 10 watts of transmission power
- TSO'd
This radio can be physically differentiated from the "regular" COM-810 by the extra strip across the bottom of the faceplate. This makes the COM-810+R slightly taller than the "regular" COM-810 and enables the COM-810+R to fit the legacy Narco COMM mounting rack.
