| | |
|
| King KX-165 NAV/COMM, 28 Volts | | Product Information | | Model | King KX-165 NAV/COMM, 28 Volts | | Part Number | P/N: 069-1025-04 - 720 COMM channels
P/N: 069-1025-06 - 720 COMM channels, wider 50 kHz receiver selectivity
P/N: 069-1025-24 - 760 COMM channels
P/N: 069-1025-26 - 760 COMM channels, wider 50 kHz receiver selectivity | | Condition | Serviceable | | Certification | 8130-3 | | Voltage | 28 volts | | Included | Rack & Connector (if needed), 90 Day Warranty | | Comments | This version of the KX-165 does not have Glideslope capability.
This radio tunes 760 COMM channels. We may be able to supply a less-expensive 720 COMM channel version of this KX-165, but please ask. Most KX-165 radios have 760 COMM channels, and that is the version we usually have in stock.
There is an LED Display Upgrade for this radio. The LED Display improves readability, and could last for the life of the radio. If you choose the LED Display Upgrade option, we will install a New LED Display in this radio before shipping it to you. (Please allow 1-2 weeks.) |
The King KX-165 NAV/COMM is very similar to the familiar KX-155, but with an important difference. Unlike the KX-155, the KX-165 does contain an internal VOR/LOC Converter. This means that the KX-165 may be used to directly drive the King KI-525A HSI, which is part of the King KCS-55A Compass System.
The KX-165 has King's easy-to-read, bright gas-discharge display. This display shows simultaneous active and standby frequencies for both the NAV and COMM sides. The KX-165 NAV/COMM tunes in 200 NAV channels and 760 COMM channels.
As a nice "extra" feature, the KX-165 can display the current radial from the active VOR. This information may be displayed instead of the standby NAV frequency.
This version does not include a Glideslope Receiver.
The King KX-165 also features:
- Solid state design
- 10 watts transmit power
- Push button frequency flip-flop
- TSO'd
The "non-Glideslope" KX-165 may be used with the following King Indicator:
-
King KI-202 GPS/VOR/LOC Indicator
We are often asked about adding Glideslope capability to a KX-165. Unfortunately, the KX-165 will not work with any external Glideslope Receivers because it does not output Glideslope channeling. Without this information, the Glideslope Receiver would not know which of the Glideslope frequencies to tune.
If you want Glideslope with a KX-165, you must use one with the Glideslope board installed. We generally recommend an exchange in this situation.
You may also be interested in an HSI or Indicator to use with this KX-165.
If you have any questions about this item, please click  to send us an email.
|
Click an image below to enlarge | |
Bennett Avionics: Quality Used Avionics, Professional Service
|
|
