|Part Number:||P/N: 069-1024-00 - 720 COMM channels|
|Part Number:||P/N: 069-1024-02 - 720 COMM channels, wider 50 kHz receiver selectivity|
|Part Number:||P/N: 069-1024-08 - 720 COMM channels, audio amplifier|
|Part Number:||P/N: 069-1024-10 - 720 COMM channels, wider 50 kHz receiver selectivity, audio amp|
|Part Number:||P/N: 069-1024-30 - 760 COMM channels|
|Part Number:||P/N: 069-1024-32 - 760 COMM channels, wider 50 kHz receiver selectivity|
|Part Number:||P/N: 069-1024-38 - 760 COMM channels, audio amplifier|
|Part Number:||P/N: 069-1024-40 - 760 COMM channels, wider 50 kHz receiver selectivity, audio amp|
|Part Number:||We do not sell radios with 50 kHz receiver selectivity. If you need a replacement, we would send one with standard 25 kHz selectivity.|
|Condition:||Serviceable (Certified Used)|
|Included:||Rack & Connector (if needed), 90 Day Warranty|
|Comments:||This version of the KX-155 does not have Glideslope capability.|
|Comments:||The Audio Amplifier versions are normally only needed when the KX-155 is the only radio, and the amp powers the cabin speaker. If you have more than one radio, the Audio Panel will typically power the cabin speaker.|
|Comments:||The LED Display Upgrade improves readability, and could last for the life of the radio. We will install a New LED Display in this radio before shipping it to you. (Please allow 3-6 weeks, due to delays from Honeywell.)|
|Comments:||If you plan to use this radio to replace an already-installed KX-155, please indicate that you do not need the Rack & Connector. This will save you money, and we will save the installation hardware for customers who need it.|
It took a very good radio to replace the King KX-170B NAV/COMM as an industry standard. That radio is the King KX-155. It took the KX-170B's reputation for reliability, and added a number of features made possible by modern electronics.
This radio has King's easy-to-read, bright gas-discharge display. This display shows simultaneous active and standby frequencies for both the NAV and COMM sides. The KX-155 NAV/COMM tunes in 200 NAV channels and 720 COMM channels (a newer 760 channel version is available at extra cost).
This version does not include a Glideslope Receiver. The King KX-155 also features:
- Solid state design
- 10 watts transmit power
- Push button frequency flip-flop
The KX-155 may be used with these King indicators that contain an internal VOR/LOC Converter:
We are often asked about adding Glideslope capability to a KX-155. Unfortunately, the KX-155 will not work with any external Glideslope Receivers because it does not output Glideslope channeling. Without this information, the Glideslope Receiver would not know which of the Glideslope frequencies to tune.
If you want Glideslope with a KX-155, you must use one with the Glideslope board installed. We generally recommend an exchange in this situation.